2002 Nissan Sentra GXE

Programming remote fob

1. Get inside the vehicle. Close and lock all doors using lock/unlock switch on the driver's side door. (Do not use the remote.)
2. Insert your keys into the ignition and remove it 6 times within 10 seconds. You will need to fully insert and remove the key during this step each time, in roughly one second intervals. The hazard lamps will flash when done correctly. If the hazard lamps do not flash do the procedure 10 times rather than 6 times.
3. Insert the key in the ignition and turn it to the ACC position.
4. Withint 5 seconds, push the lock button once on the new remote. The hazard lamps will flash to confirm the programming.
5. If you have other remotes including new and existing working remotes, follow this step, else skip to step 6. UNLOCK then LOCK the doors by using lock/unlock switch on the driver's side door. Within 5 seconds press the lock button on the rmeote you are now programming. Your hazard lamps will flash to confirm programming. Repeat this same process for all remaining remotes to be programmed.
6. Once you have programmed all remotes turn the ignition to OFF and completely remove the key from ignition. UNLOCK all doors using the lock/unlock switch on the driver's side door.
7. Test all remotes to confirm programming.