VTech DS6722-3: Difference between revisions

From Han Wiki
Jump to navigation Jump to search
iwu
 
→‎Register the handset: update with a working instruction
 
Line 9: Line 9:
== Register the handset ==
== Register the handset ==


Press *7890# and then get to REG CLR if the message about power is still there. Hold on to the FIND HANDSET button for about 4 seconds to have a IN USE light turn on solid.  Now, press the # button on the handset. Voila!
Grab a handset, and if it still says "Out of range or no pwr at base" press on Menu and get to Settings. Then press *7890#, which will display TEST HANDSET. Click MENU/SELECT, and then get to REGSTR CLEAR and click MENU/SELECT again.  MENU/SELECT once more to confirm.  Hold on OFF/CANCEL until "To register HS ... see manual" message comes up. If "To register HS" still doesn't come up, remove battery and put it back in about 20 seconds later.
 
On the base, hold on to the FIND HANDSET button for about 4 seconds to have a IN USE light turn on solid.  Now, press the # button on the handset. Voila!

Latest revision as of 12:35, 3 August 2019

Registering the handsets

I noticed that after a power outage, my VTech wireless phones at home would lose all of their connections to the base. What may be happening is that the key stored on the base for the connection is being lost during the power outage. However, the message that appears on the phones can be misleading: "Out of range or no pwr at base" There are basically two steps to restore the connection to the base, and they are de-registering all of the handsets at the base, and then registering the handsets. I have DS6722-3, which was exclusively available at Costco locations in 2016.

Deregistering all handsets

At the base, hold on to the FIND HANDSET button for 15 seconds or longer, or until the "IN USE" light starts flashing. Then press the FIND HANDSET button again.

Register the handset

Grab a handset, and if it still says "Out of range or no pwr at base" press on Menu and get to Settings. Then press *7890#, which will display TEST HANDSET. Click MENU/SELECT, and then get to REGSTR CLEAR and click MENU/SELECT again. MENU/SELECT once more to confirm. Hold on OFF/CANCEL until "To register HS ... see manual" message comes up. If "To register HS" still doesn't come up, remove battery and put it back in about 20 seconds later.

On the base, hold on to the FIND HANDSET button for about 4 seconds to have a IN USE light turn on solid. Now, press the # button on the handset. Voila!